Ordering a glass splashback is one of the easiest ways to give your kitchen a clean, modern finish. But before choosing your design, it is important to measure your space correctly.
Accurate measurements help ensure your splashback fits neatly behind your hob, sink or worktop area. This guide explains how to measure for glass splashback panels before placing an order.
Before You Start
Before measuring, make sure the wall area is ready and easy to access. Clear the worktop and remove any loose items around the space.
You will need:
- A tape measure
- A pencil
- Paper or notes app
- A spirit level
- Photos of the wall area
If possible, take photos of the space from straight on. This can be useful when checking details such as sockets, cabinets and corners.
Measure the Width
Start by measuring the full width of the area where the splashback will sit.
Measure from the left edge to the right edge. If the panel is going between two cabinets, walls or worktop edges, measure the space carefully at the top, middle and bottom.
Walls are not always perfectly straight, so checking more than one point helps avoid mistakes.
Measure the Height
Next, measure the height of the splashback area.
For a hob splashback, this is usually the distance from the worktop up to the extractor hood or wall cabinet above.
For a larger feature panel, measure from the bottom edge to the highest point where you want the glass to finish.
Write the measurements down clearly in millimetres.
Check for Sockets and Cut-Outs
If there are plug sockets, switches or other fittings in the splashback area, these need to be measured carefully.
Measure:
- Distance from the left edge to the socket
- Distance from the bottom edge to the socket
- Width and height of the socket
- Position of any switches or cut-outs
A quick photo can make this much easier to understand.
Consider the Hob Area
If your splashback is going behind a hob, check the exact position of the hob in relation to the wall, cabinets and extractor.
The glass should sit neatly behind the cooking area while leaving the kitchen looking balanced.
This is especially important if the hob is not perfectly centred between cabinets.
Think About the Finish
Once you have your measurements, you can start thinking about the look of the splashback.
Popular choices include:
- Neutral glass splashbacks
- Printed glass splashbacks
- Marble-effect designs
- Botanical designs
- Bold feature panels
The right design can turn a practical kitchen surface into a standout feature.
Double Check Everything
Before placing your order, check every measurement again.
It is always better to measure twice than to order the wrong size. Make sure your numbers are written clearly and that width and height are not mixed up.
If you are unsure, contact the supplier before ordering.
Why Accurate Measuring Matters
A well-measured splashback looks cleaner, fits better and helps create a more professional finish.
It also makes the ordering process easier, especially if you are choosing a made-to-order design.
For more information about toughened glass, you may also find this external guide useful.
Ready to Choose Your Design?
Once you know your measurements, the next step is choosing the right splashback for your kitchen.
Browse our glass splashback range to explore modern, printed and custom designs for your home.